If Your LG Washing Machine is not draining, you may need a Pump Replacement.
There are a few common issues that can arise which constitute a LG Washing Machine Drain Pump Replacement. Here are the top three things that can go wrong:
- Clogs: The pump can become clogged with debris such as lint, hair, or small items that have fallen into the tub during a wash cycle. This can prevent the pump from working properly and cause issues with draining.
- Wear and tear: Over time, the pump may wear out or become damaged due to regular use. This can cause the pump to malfunction or fail.
- Electrical problems: The pump is powered by electricity and can experience problems if there is an issue with the wiring or the electrical components of the machine. This can cause the pump to stop working or function improperly.
If your LG washing machine is experiencing problems, the pump may need to be replaced. Take a look at the following LG Washer Error Codes to see if any fit the issue.
While this process is relatively simple, it’s important to make sure it’s done correctly to ensure the proper functioning of your washing machine. That’s where Ridge Appliance Repair comes in. Our team of experienced technicians is trained to handle LG washing machine pump replacements with efficiency and expertise.
LG Washer Pump Replacement Cost
The cost of an LG washing machine pump replacement can vary depending on several factors, including the specific model of your washing machine, the cost of the replacement pump, and any additional parts or labor that may be required. In general, you can expect to pay anywhere from $150 to $450 for an LG washing machine pump replacement.
It’s important to note that this price range is just an estimate and the actual cost of a pump replacement may be higher or lower depending on your specific situation. It’s always a good idea to get a detailed quote from a reputable appliance repair company before proceeding with any repair work, this is usually done during the time or shortly after the initial service call. This will help you better understand the total cost of the repair and give you a better idea of what to expect.
If you are considering an LG washing machine pump replacement, it’s a good idea to schedule your service call as soon as possible. Be sure to ask about any additional fees or charges that may not be included in the initial quote, such as a diagnostic fee or a charge for parts. By doing your research and selecting a reputable appliance repair company, you should be able to find the best deal on an LG washing machine pump replacement.
9 Steps To Replacing an LG Washing Machine Pump (If you attempt to DIY)
f you have a front-loading LG washing machine, you may have or have not noticed that it has a small pump located at the bottom of the machine. This pump is responsible for pumping out the water from the tub during the draining cycle.
Over time, this pump can become clogged or damaged, which can cause problems with your washing machine. If you are experiencing issues with your LG washing machine, the pump may need to be replaced.
Below, we will discuss the steps involved in replacing the pump on an LG washing machine.
- Step 1: Unplug the washing machine and turn off the water supply. Before you begin working on your washing machine, it is important to unplug it and turn off the water supply to ensure your safety.
- Step 2: Remove the front panel of the washing machine. The front panel of the washing machine is held in place with a series of screws. Use a screwdriver to remove these screws and then lift the front panel off of the machine.
- Step 3: Locate the pump. The pump is located at the bottom of the machine and is connected to the tub by a hose.
- Step 4: Disconnect the hose from the pump. Use a pair of pliers to gently remove the hose from the pump. Be careful not to damage the hose as you remove it.
- Step 5: Remove the pump from the machine. The pump is held in place with a series of screws. Use a screwdriver to remove these screws and then gently lift the pump out of the machine.
- Step 6: Install the new pump. Place the new pump into position and secure it with the screws.
- Step 7: Reconnect the hose to the new pump. Use a pair of pliers to gently attach the hose to the new pump.
- Step 8: Replace the front panel. Once the new pump is in place and the hose is connected, you can replace the front panel of the washing machine. Secure the panel with the screws that you removed earlier.
- Step 9: Turn the water supply back on and plug the washing machine in. Test the machine to ensure that it is working properly.